5 Essential Elements For refacing oak cabinets

This Pro has passed a history Verify and has actually been confirmed of all applicable condition-amount licenses.

In several conditions we can get you several remodeling estimates that can assist you discover the best deal and conserve. No challenge is just too massive or far too small for our community of home remodeling specialists.

Fill dents and deep scratches with wood filler, then sand carefully until finally all complete is eliminated and the wood is super clean with no scratches. 

Remember to see HomeAdvisor's Conditions and terms for more in depth information on our Professional demands, screening processes, and disclaimers.



Lancaster cabinet door accessible in difficult maple and cherry species Lancaster veneer cabinet doors are ready for stain and/or sealing

A specialist kitchen contractor has the know-how and encounter to get your task from the start to its completion. He has all the necessary equipment to make a wonderful position. He can also give you advice and concepts for your kitchen challenge.

Time Constraints: When you've got restricted time or knowledge, choosing gurus can ensure a more quickly and a lot more successful refacing procedure.

Once you clean the cabinet’s face body and sides give everything a good sanding to scuff the wood and provides the veneer’s peel and more info adhere adhesive anything to bite on to. Address the uncovered ends in the cabinet by using wood glue to bond the plywood to the box. Use a pointy utility knife and straight edge to trim strips of veneer about 1/two-inch wider and 1-inch longer than you need, taking note of match the wood grain’s orientation to your Component of the cabinet you’re covering.

Now you may utilize a protecting coat of clear polyurethane varnish. Applying any very clear coat need to be finished in a dust-totally free setting. 

This complete may glance a bit streaky, but you must only have to have a single coat of primer in advance of moving on to paint. Pour the excess primer again into the can and thoroughly clean the brush and paint tray even though allowing for the primer to dry.




This Pro has handed a background Test and is confirmed of all applicable condition-amount licenses.

Custom doors are made by you and developed to your technical specs. Semi-custom is just what exactly they imply; they have got some prefab factors and some custom aspects. Inventory is proven designs you buy and put in, and prepared-to-assemble doors demand some Do it yourself expertise.

Should you have problems that a pro in our community won't meet up with these expectations, be sure to Get hold of us to research. We're dedicated to keeping a network of dependable home provider organizations, and those who Really don't fulfill our requirements is going to be rejected or promptly faraway from our network.

We'd Completely endorse Kitchen Magic to any one which is remodeling their kitchen. The quality, professionalism, and courtesy that we normally try to look for in corporations ended up all there. I just don't have enough very good issues to state. It was amazing.